Sodium tends lose a single electron in natural settings. Based on what you know, what are two other elements that tend to do the same thing?

Answers

Answer 1

Answer:

Lithium and Sodium

Explanation:

Losing and electron in natural setting is characterizes of elements in group one. These are elements known as the alkaline earth metals. They are the most electropositive elements on the periodic table.

These elements ionize by losing an electron yin their outermost shell to attain the configuration of the nearest noble gas. These elements are usually found in combined and rarely seen in uncombined state principally due to their very reactive nature.

Sodium naturally would ionize by losing one electron. Other elements capable of this even at a better rate because they are more electropositive are potassium and lithium. Both are also group one alkaline metals


Related Questions

The atomic mass of sulfur is 32.1 amu, and the atomic mass of oxygen is 16.0 amu. To the nearest tenth of a percent, what is the percent by mass of sulfur in sulfur trioxide (SO3)?

Answers

Answer:

[tex]\%\ Composition\ of\ sulfur=40.1\ \%[/tex]

Explanation:

Percent composition is percentage by the mass of element present in the compound.

Given , Mass of sulfur= 32.1 amu

Mass of oxygen = 16.0 amu

Mass of sulfur trioxide [tex]SO_3[/tex] = 32.1 amu + 3*16.0 amu = 80.1 amu

[tex]\%\ Composition\ of\ sulfur=\frac{Mass_{sulfur}}{Mass_{SO_3}}\times 100[/tex]

[tex]\%\ Composition\ of\ sulfur=\frac{32.1\ amu}{80.1\ amu}\times 100=40.1\ \%[/tex]

Final answer:

To determine the percent by mass of sulfur in sulfur trioxide (SO3), calculate the molar mass of the compound and divide the atomic mass of sulfur by the total molar mass. The percent by mass of sulfur in SO3 is found to be 40.0%.

Explanation:

To find the percent by mass of sulfur in sulfur trioxide (SO3), we first calculate the molar mass of the compound. We have one sulfur atom and three oxygen atoms in SO3.

Molar mass of S = 32.07 amuMolar mass of O = 16.00 amu (for one oxygen atom)

Next, we calculate the molar mass of SO3:

Molar mass of SO3 = Molar mass of S + 3 × Molar mass of O
= 32.07 amu + 3 × 16.00 amu
= 32.07 amu + 48.00 amu
= 80.07 amu

To find the percent composition of sulfur, we divide the molar mass of sulfur by the total molar mass of the compound and multiply by 100:

Percent by mass of S in SO3 = (Molar mass of S / Molar mass of SO3) × 100%
= (32.07 amu / 80.07 amu) × 100%
= 40.0% (to the nearest tenth of a percent)

A sample may contain any or all of the following ions: Hg22+, Ba2+, and Mn2+.
(a) No precipitate formed when an aqueous solution of NaCl was added to the sample solution.
(b) No precipitate formed when an aqueous solution of Na2SO4 was added to the sample solution.
(c) A precipitate formed when the sample solution was made basic with NaOH.
Which ion or ions are present in the sample solution? (Select all that apply.)
Mn2+ ions
Ba2+ ions
Hg22+ ions

Answers

Answer:

The ion present in the sample solution is Mn2+

Explanation:

(a) No precipitate formed when an aqueous solution of NaCl was added to the sample solution.

Most chlorides are quite soluble in water except for he  H g 2 C l 2, that  is an insoluble salt. Since no precipitation formed upon addition of NaCl,  H g 2 +  was not present in the sample.

(b) No precipitate formed when an aqueous solution of Na2SO4 was added to the sample solution.

The  B a S O 4  is an insoluble salt too. Since no precipitation formed upon addition of N a 2 S O 4 ,  the ion B a 2 +  was not present in the sample.

(c) A precipitate formed when the sample solution was made basic with NaOH.

As the M n ( O H ) 2 is insoluble in this last solution, the precipitate formed corresponds to B a S O 4 and H g 2 C l 2 compounds , therefore it can be concluded that the present ion in the sample solution is Mn+2.

What is the balanced chemical equation for the word equation below?

Iron and oxygen react to form iron III oxide.

Answers

Answer:

4Fe + 3O₂ → 2Fe₂O₃

Explanation:

Fe → ²⁺

O → ²⁻

But Iron III is Fe³⁺

So we have Fe³⁺ and O²⁻, the formula for the oxide must be Fe₂O₃ so the equation can be:

4Fe + 3O₂ → 2Fe₂O₃

A 8.6 g rock sample is added to a graduated cylinder filled with water, causing the level to increase from 12.8 mL to 13.6 mL. What is the density of the rock sample?

Answers

Final answer:

The density of the rock sample is 10.75 g/cm³.

Explanation:

The density of an object can be calculated using the formula:

Density = mass/volume

In this case, we have the mass of the rock sample (8.6 g) and the change in volume of the water in the graduated cylinder (13.6 mL - 12.8 mL = 0.8 mL). To calculate the density, we need to convert the volume from mL to cm³, since the mass is in grams.

1 mL = 1 cm³, so the volume of the rock sample in cm³ is 0.8 cm³.

Now, we can calculate the density:

Density = mass/volume

Density = 8.6 g / 0.8 cm³

Density = 10.75 g/cm³

Therefore, the density of the rock sample is 10.75 g/cm³.

Learn more about Density here:

https://brainly.com/question/34199020

#SPJ3

The density of the rock sample is found to be 10.75 g/mL by dividing its mass, 8.6 g, by the volume of water it displaced, which is 0.8 mL.

To determine the density of the rock sample, we use the formula density = mass/volume. The mass of the rock is given as 8.6 g. The volume displaced by the rock is the change in the water level in the graduated cylinder: 13.6 mL - 12.8 mL = 0.8 mL.

Now, we can calculate the rock's density:

Density = Mass / Volume

Density = 8.6 g / 0.8 mL

Density = 10.75 g/mL

Therefore, the density of the rock sample is 10.75 g/mL.

When 2−bromo−3,3−dimethylbutane is treated with K⁺ −OC(CH₃)₃, a single product T having molecular formula C₆H₁₂. When 3,3−dimethyl−2−butanol is treated with H₂SO₄, the major product U has the same molecular formula. Given the following ¹H NMR data, what are the structures of T and U?

Answers

Answer:

T = 3,3-dimethylbut-1-ene

U = 2,3-dimethylbut-2-ene

Explanation:

The chemical reactions for the two reactions and the mechanisms of reaction are shown in the two attachments to this answer.

Hope it helps!

Which contains more molecules, a mole of water or a mole of glucose?

Answers

Answer:

Both, water and glucose contain the same molecules

Explanation:

Although one mole of glucose has more mass than one mole of water, if we refer to the amount of atoms (or molecules) it is known that 1 mole contains the number of Avogadro in particles. No matter if the molar mass is bigger or smaller, 1 mol of anything has always 6.02×10²³ particles

At Mountain X, you could boil water in less than 3 minutes. At Mountain Y, it takes you almost 7 minutes to boil the same amount of water. What can be said about the elevations of both mountains?

A. The elevation of both mountains is the same.
B. Mountain X has a higher elevation than Mountain Y.
C. Mountain X has a lower elevation than Mountain Y.
D. Cannot determine from the information given

Answers

Answer:

The answer to your question is letter B.

Explanation:

Water boils at sea level at 100°C at higher heights the boiling point diminishes. That means that at higher heights the time needed to boil water will be lower than at sea level.

In this problem at mountain B is only 3 minutes needed to boil water that means that the height is higher here.

Answer:

The correct answer is B. Mountain X has a higher elevation than Mountain Y

Explanation:

The boiling point of a liquid reduces as the altitude where the boling takes place increases. With every 500 ft increase in altitude the boiling point of water devreses by 0.5 °C as such the boiling point of water at 8000 ft is just 92 °C. To compenasate cooking at altidude require the use of a pressure cooker as it is hard to boil items such as potatoes at very high altitudes of thousands of feet

What mass of strontium nitrate (Sr(NO3)2) would be required to prepare 2.000 L of a 0.0150 M aqueous solution of this salt?

Answers

Final answer:

To prepare a 0.0150 M solution of strontium nitrate in 2.000 L, you would need to use 4.49 grams of strontium nitrate.

Explanation:

To calculate the mass of strontium nitrate required to prepare the solution, we can use the formula:

moles = concentration x volume

First, convert the concentration to moles per liter:

moles/liter = concentration = 0.015 M

Next, multiply the moles per liter by the volume in liters to find the moles of strontium nitrate:

moles = (0.015 M) x (2.000 L) = 0.030 mol

Finally, calculate the mass of strontium nitrate using the molar mass:

mass = moles x molar mass = 0.030 mol x 149.6 g/mol = 4.49 g

How does William Jennings Bryan respond to the criticism that the free and unlimited coinage of silver will disrupt ""business interests""?

Answers

Answer:

He responded by saying their business definition was far too narrow.

Explanation:

Williams Bryan relates the battle for free silver with the revolution in the United States.

His iconic "Cross of Gold" address ignited the Democratic National Convention in 1896 where he begged the american people not to be "crucified on the cross of gold." He was said this because of the Republicans plan to introduce a firm gold standard and abolish silver coinage.

Nitrogen gas and hydrogen gas are combined in a reaction to produce ammonia. If 3.0 moles of N2 and 12.0 moles of H2 are present in the mixture, which is the limiting reactant?

Answers

Answer:

The limiting reactant is the N₂

Explanation:

The reaction for production of ammonia is:

N₂ + 3H₂  → 2NH₃

Ratio is 1:3. Let's make a rule of three to solve this:

1 mol of nitrogen is needed to react with 3 moles of hydrogen.

3 moles of nitrogen may react with (3 . 3) /1 = 9 moles of H₂

It is ok because I have 12 moles, so the limiting reactant is the N₂ but let's confirm it.

3 moles of H₂ react with 1 mol of N₂

12 moles of H₂ would react with (12. 1) / 3 = 4 moles of N₂

It's ok to say the N₂ is the limiting because I don't have enough moles to react. I need 4 and I only have 3

Final answer:

To determine the limiting reactant in the reaction to produce ammonia, we compare the stoichiometric amounts needed according to the balanced equation. Nitrogen is the limiting reactant in this reaction because it requires more hydrogen than what is available to completely react.

Explanation:

To determine the limiting reactant between nitrogen gas (N2) and hydrogen gas (H2) in the synthesis of ammonia (NH3), we use the balanced chemical equation:

N2 + 3 H2 ->2 NH3

According to the equation, each mole of nitrogen reacts with three moles of hydrogen to produce two moles of ammonia. Given the reaction mixture of 3.0 moles of N2 and 12.0 moles of H2, we compare the stoichiometric amounts needed for the reaction. The nitrogen gas would require 9.0 moles of hydrogen gas to fully react (3 moles N2  imes 3 moles H2/1 mole N2 = 9 moles H2). Since there are 12.0 moles of hydrogen gas available, hydrogen is in excess, and nitrogen is the limiting reactant.

Calculate the concentrations of all species in a 1.15 M Na 2 SO 3 (sodium sulfite) solution. The ionization constants for sulfurous acid are K a 1 = 1.4 × 10 − 2 and K a 2 = 6.3 × 10 − 8 .

Answers

Final answer:

The concentration of Na+ in a 1.15 M Na2SO3 solution is 2.30 M, and the concentration of SO32- is 1.15 M, as Na2SO3 dissociates entirely into these ions in solution.

Explanation:

To calculate the concentration of all species in a 1.15 M Na2SO3 (sodium sulfite) solution, we need to consider the ionization of sulfurous acid (H2SO3), which isn't explicitly present but relates to the anion derived from Na2SO3. The ionization constants given are Ka1 = 1.4 × 10−2 for the first dissociation (H2SO3 to HSO3−) and Ka2 = 6.3 × 10−8 for the second dissociation (HSO3− to SO32−). Although, given the context, we aren't going through the complete step-by-step equilibrium calculation for Ka1 and Ka2, we understand that Na2SO3 dissociates completely in solution to Na+ and SO32−. Therefore, initially, the concentration of Na+ is 2.30 M (since each Na2SO3 unit yields two Na+ ions), and the concentration of SO32− is 1.15 M.

The concentrations in the 1.15 M Na2SO3 solution are approximately:

- [tex][H2SO3] = [HSO3^-] = 1.15 M,[/tex]

- [tex][SO3^2-] = 2.10 \times 10^-5 M,[/tex]

- [tex][Na^+] =1.15 M, and[/tex]

- [tex][OH^-] = 8.70 \times 10^-14 M.[/tex]

Given:

- Initial concentration of [tex]\(Na_2SO_3\) = 1.15 M[/tex]

- [tex]\(K_a1\)[/tex] for sulfurous acid [tex]= \(1.4 \times 10^{-2}\)[/tex]

- [tex]\(K_a2\)[/tex]for sulfurous acid [tex]= \(6.3 \times 10^{-8}\)[/tex]

We can assume that the ionization of [tex]\(Na_2SO_3\)[/tex] into [tex]\(HSO_3^-\)[/tex] and  [tex]\(Na^+\)[/tex] is small due to the weak acid nature of sulfurous acid. So, the initial concentration of [tex]\(H_2SO_3\)[/tex] is approximately equal to 1.15 M.

Now, we approximate the concentration of [tex]\(H^+\)[/tex] ions to be approximately equal to the concentration of [tex]\(H_2SO_3\)[/tex], which is 1.15 M.

Using [tex]\(K_a2\)[/tex], we calculate the concentration of [tex]\(SO_3^{2-}\)[/tex] ions:

[tex]\[ [SO_3^{2-}] = \frac{[H^+]^2}{K_a2} \approx \frac{(1.15)^2}{6.3 \times 10^{-8}} \approx 2.10 \times 10^{-5} \, \text{M} \][/tex]

Since [tex]\(HSO_3^-\)[/tex] ions concentration is approximately equal to [tex]\(H^+\)[/tex] ions concentration and [tex]\(Na^+\)[/tex] concentration is the same as [tex]\(Na_2SO_3\)[/tex], we have:

- [tex]\([H_2SO_3] = [HSO_3^-] \approx 1.15 \, \text{M}\)[/tex]

- [tex]\([SO_3^{2-}] \approx 2.10 \times 10^{-5} \, \text{M}\)[/tex]

- [tex]\([Na^+] \approx 1.15 \, \text{M}\)[/tex]

The concentration of [tex]\(OH^-\)[/tex] ions can be calculated using the [tex]\(K_w\)[/tex]expression:

[tex]\[ [OH^-] = \frac{K_w}{[H^+]} \approx \frac{1.0 \times 10^{-14}}{1.15} \approx 8.70 \times 10^{-14} \, \text{M} \][/tex]

the temperature of a sample of copper increased by 23.0 C when 265 J of heat was applied. What is the mass of the sample?

Answers

Final answer:

To find the mass of the copper sample, we use the formula for heat transfer Q = mcΔT. By substituting the given values of specific heat capacity of copper, the amount of heat applied and the change in temperature into the formula and solving for mass, we find the mass of the copper sample to be 29.54g.

Explanation:

The subject of this question is physics, specifically dealing with the concept of heat transfer. To determine the mass of the copper sample, we'll use the formula for heat transfer: Q = mcΔT, where 'Q' is the amount of heat transferred, 'm' is the mass of the substance, 'c' is the specific heat capacity, and 'ΔT' is the change in temperature.

In this case, we know that the specific heat capacity of copper is 0.39 J/g °C, the amount of heat applied (Q) is 265 J and the change in temperature ΔT is 23.0 °C. By substituting these values into the formula, we can solve for 'm' (mass). Rearranging the formula gives us m = Q / (cΔT). Substituting the given values, we find m = 265 J / (0.39 J/g°C * 23.0°C) gives us the mass of the copper sample to be 29.54 g.

Learn more about Heat Transfer here:

https://brainly.com/question/13433948

#SPJ12

The biopsychosocial perspective, compared with the perspectives of Freud, Jung, and Rogers, __________.

Answers

Answer:

Is broader than other models

Explanation:

George Engel conceptualised the biospychosocial model in 1977. He suggested apart from the biological condition a persons medical condition is also dependent on social and psychological factors.

This model is used in cases of chronic pain and considers the pain as a psychophysiological behaviour pattern that cannot be categorised into social, psychological and biological perspective.

There are suggestions that physiotherapy should be integrated into psychological treatment to address the various components that comprises the experience of pain.

The osmotic pressure, Π, of a solution of glucose is 83.1 atm . Find the molarity of the solution at 298 K. Express the molarity to three significant figures and include the appropriate units.

Answers

Final answer:

The molarity of the glucose solution is approximately 3.38 M, found by substituting values of osmotic pressure and temperature into the formula for osmotic pressure and solving for molarity.

Explanation:

The osmotic pressure, Π, of a solution is given by the equation Π = cRT, where c represents the molarity of the solution, R is the ideal gas constant (0.0821 L·atm/K·mol), and T is the temperature in Kelvin. Given that the osmotic pressure is 83.1 atm and the temperature is 298 K, you can solve for c (molarity) by rearranging the equation: c = Π/(RT). Substituting the given values into the equation gives you c = 83.1 / (0.0821 x 298) = 3.38 M. Therefore, the molarity of the glucose solution is approximately 3.38 M.

Learn more about Osmotic Pressure here:

https://brainly.com/question/37985044

#SPJ3

Neils Bohr published his model of the atomic structure in 1913. He introduced the theory of electrons traveling in orbits around the atom's nucleus, with electrons orbiting only in certain orbits called shells. Each shell can contain a fixed number of electrons.

According to this model of the atom, the chemical properties of an element are mainly determined by ________.

Answers

According to this model of the atom, the chemical properties of an element are mainly determined by arrangement and distribution of electrons.

According to Niels Bohr's atomic theory, the distribution and arrangement of an element's electrons in its outermost shell, commonly known as the valence shell, largely determines its chemical characteristics.

An element's capacity to form bonds and interact with other elements to form compounds depends on the number of electrons in its valence shell and how quickly they may be obtained, lost, or shared during chemical processes.

Thus, key factor in determining an element's reactivity and place in the periodic table, as well as its chemical behavior and properties, are the valence electrons.

For more details regarding atomic theory, visit:

https://brainly.com/question/28853813

#SPJ3

The physicals properties of a substance can be used to identify the substance, because_____. Select all that apply.

1. at any given location, the physical properties of a substance do not change
2. when the substances are chemically reacted the physical properties remain the same
3. each substance has a unique set of physical properties
4. no two substances have any of the same properties

Answers

Answer:

1. at any given location, the physical properties of a substance do not change.

2. Each substance has a unique set of physical properties

Explanation:

The physical property of a substance is a feature of a substance that can be noticed or measured without changing the key identity of the substance. Physical properties include density, hardness, melting point, colour etc...

Answer:

1. at any given location, the physical properties of a substance do not change

3. each substance has a unique set of physical properties

Explanation:

1. The physical properties of a substance do not change provided that the physical conditions in the niche environment remain same.

3. Every substance on Earth has a unique set and arrangement of atoms and molecules that give them their own unique properties.

Which type of intermolecular attractive force operates between (part A) all molecules, (part B) polar molecules, (part C) the hydrogen atom of a polar bond and a nearby small electronegative atom

Answers

Answer:

PART A: The LDF occurs between all molecules. Dispersion forces result from shifting electron clouds, which cause weak, temporary dipole.

PART B: Dipole dipole operates only between polar molecules. This is when two polar molecules get near each other and the positively charged portion of the molecule is attracted to the negatively charged portion of another molecule.

PART C: Dipole dipole and in some cases hydrogen bonding operate between the hydrogen atom of a polar bond and a nearby small electronegative atom. Only if the atom bonded to it were F, O or N it would be hydrogen bonding. Otherwise it is dipole dipole.

All molecules - Dispersion force.

Polar molecules - Dipole–Dipole interaction.

The hydrogen atom of a polar bond and a nearby small electronegative atom  - Dipole–Dipole and Hydrogen Bonding.

What are intermolecular attractive force?

Intermolecular force is a force that connect molecules to each other.

There are four types of forces present

DispersionDipole–DipoleHydrogen Bonding Ion-Dipole

Thus, the bonds present are: All molecules - Dispersion force.

Polar molecules - Dipole–Dipole interaction.

The hydrogen atom of a polar bond and a nearby small electronegative atom  - Dipole–Dipole and Hydrogen Bonding.

Learn more about bonds, here:

https://brainly.com/question/13559242

What is the percentage composition of soap (C12H35COON)?

Answers

Answer:

Carbon percentage 65.8% Hydrogen percentage 14.9% Oxygen percentage 13.4% Nitrogen percentage 5.9%

Explanation:

The molar mass of C12H35COON is 237.41g/mol

Carbon percentage composition= (12.01*13)/237.41 *100= 65.8%

Hydrogen percentage composition= (1.008*35)/237.41 *100= 14.9%

Oxygen percentage composition= (15.99*2)/237.41 *100= 13.4%

Nitrogen percentage composition= (14.007)/237.41 *100= 5.9%

The percent composition of soap is as follows carbon-65.82 %, hydrogen-14.76%,oxygen-13.50%,nitrogen- 5.90%.

What is percent composition?

The Percent composition is defined as a convenient way to record concentration of solution.It is a expression which relates mass of each type of an element present in a compound. It is useful in analysis of compounds providing elemental composition.It is useful in even analysis of ores giving metal content information.

The molar mass of soap C₁₂H₃₅COON=237 g/mole, thus for carbon=12×13/237×100=65.82%, for hydrogen=1×35/237×100=14.76%., for oxygen= 16×2/237×100=13.50%, for nitrogen=14/237×100=5.90%.

Thus, the percent composition of soap is as follows carbon-65.82 %, hydrogen-14.76%,oxygen-13.50%,nitrogen- 5.90%.

Learn more about percent composition,here:

https://brainly.com/question/17505281

#SPJ3

Calculate the fraction of atoms in a sample of argon gas at 400 K that have an energy of 10.0 kJ or greater.

Answers

Answer:

The answer to this can be arrived at by clculating the mole fraction of atoms higher than the activation energy of 10.0 kJ by pluging in the values given into the Arrhenius equation. The answer to this is 20.22 moles of Argon have energy equal to or greater than 10.0 kJ

Explanation:

From Arrhenius equation showing the temperature dependence of reaction rates.

[tex]K = Ae^{\frac{Ea}{RT} }[/tex] where

k = rate constant

A = Frequency or pre-exponential factor

Ea   =       energy of activation

R = The universal gas constant

T = Kelvin absolute temperature

we have

[tex]f = e^{\frac{Ea}{RT} }[/tex]

Where

f = fraction of collision with energy higher than the activation energy

Ea = activation energy = 10.0kJ = 10000J

R = universal gas constant = 8.31 J/mol.K

T = Absolute temperature in Kelvin = 400K

In the Arrhenius equation k = Ae^(-Ea/RT), the factor A is the frequency factor and the component e^(-Ea/RT) is the portion of possible collisions with high enough energy for a reaction to occur at the a specified temperature  

Plugging in the values into the equation relating f to activation energy we get

[tex]f = e^{\frac{10000J}{(8.31J/((mol)(K)))(400K)} }[/tex] or f = [tex]e^{3.01}[/tex] = 20.22 moles of argon have an energy of 10.0 kJ or greater

Final answer:

The question asks for the fraction of argon atoms at 400 K with an energy of 10.0 kJ or higher, which would require integrating the Maxwell-Boltzmann distribution, but key information is missing for a definitive answer.

Explanation:

To calculate the fraction of argon atoms in a gas sample at 400 K with an energy of 10.0 kJ or greater, the principles of statistical mechanics and the Maxwell-Boltzmann distribution are applied. The Maxwell-Boltzmann distribution gives the fraction of particles at a certain energy level within a system at thermal equilibrium. However, we are missing some key information like the Maxwell-Boltzmann distribution function for the particular conditions set by the question, which is essential for performing such a calculation.

Typically, the calculation would require integrating the partition function over all energy states equal to or greater than 10.0 kJ. Without the exact form of the energy distribution, it is not possible to provide an accurate answer. The question pertains to a high level of physical chemistry or statistical mechanics typically studied at the college or university level.

What was the significance to India of the Persian conquest of the Indus Valley and Kashmir under Emperor Darius in the sixth century B.C.E.?

Answers

Answer:

India had a greater contact and net work with other areas or territory.

Explanation:

This lead to the introduction of new ideas and they also learnt new techniques.

How many unhybridized p atomic orbitals are present when a central atom exhibits trigonal planar geometry?

Answers

Answer:

1

Explanation:

Trigonal planar geometry is shown by the compounds where hybridization of central atom is [tex]sp^2[/tex].

In [tex]sp^2[/tex] hybridization, three hybrid orbitals are equally spaced at an angle of 120°.

Some of the compounds having [tex]sp^2[/tex] hybridization are [tex]CO_3^{2-}[/tex], [tex]SO_3[/tex], etc

In [tex]sp^2[/tex] hybridizationm, one s-orbital and 2 p-orbitals are involved.

Total no. of orbitals present in p-subshell is 3.

As 2 is involved in [tex]sp^2[/tex] hybridization, therefore no. of unhybridized orbital in [tex]sp^2[/tex] hybridization is 1.

Which of the following sites has volcanoes related to subduction? A is on an island arc, B is in the Andes, C is near Hawaii, D is along a mid-ocean ridge.

Answers

Answer:

A is on an island arc,

B is in the Andes

Explanation:

The subduction region is referred to as the subduction zone. When a plate slips underneath another, it forms a trench. Earthquakes resulting from the plate panelling often result in magma spilling across the underwater volcano trench. Island arcs are vast chains of active volcanoes with strong seismicity located along the converging tectonic plate borders. Much of the islands arcs emerge from the oceanic crust and also have originated from fall of the lithosphere into the mantle across the subduction zone. In the Andes mountain range, Under the South American plate the Nazca plate is subducting.

The sites has volcanoes related to subduction is on an island arc and is in the Andes.

A subduction zone

A subduction zone forms when continental crust and oceanic crust collide.

Subduction zones are located in the Pacific Ocean.

The subduction zone is at the western margin of South America (Andes).

Island arcs have active volcanoes found along convergent tectonic plate boundaries.

Thus option A and B are correct answer.

Learn more about Subduction zone here:

brainly.com/question/1358208

When a variable is determined by a factor outside of the function or model being​ evaluated, it is said to be A. statistically insignificant. B. exogenous. C. endogenous. D. unexplained.

Answers

Answer:

The correct answer is B. exogenous

Explanation:

Let us try to describe exogenous and endogenous variables an exogenous variable value is influenced only by factors outside a model or system and is forced onto the model, while a change in an exogenous variable is known as an exogenous change. Also an endogenous variable is one whose value is influenced only by the system or model under study.

Which states of matter can flow?
1) gas and liquid
2) gas
3) gas, liquid, and solids
4) liquid

Answers

Yah it’s the first one

Answer:

1) Gas and Liquid

Explanation:

hope it helps

N2(g) + 3 H2(g) ⇌ 2 NH3(g) + Energy
For the reaction of nitrogen gas and hydrogen gas to make methane, what stresses would shift the equilibrium to the left toward the reactants?

Answers

Answer:

The answer to your question is below

Explanation:

Reaction

           N₂ + 3H₂   ⇔   2 NH₃ + energy

a) The concentration of NH₃, if the concentration of NH₃ increases, the reaction will move to the left.

b) Diminishing the temperature, no more energy will be released and the reaction will move to the reactants.

A 50 W engine generates 50 J of energy. How long did it run for?

A. 10 s

B. 1 s

C. 5 s

D. 100 s

Answers

The engine ran for 10 second

Answer:  A  Explanation:

State the number of solutions for Matrix B. a. No Solution b. One Solution c. Infinitely Many Solutions

Answers

Answer:

C. Infinitely Many Solutions

Explanation:

No solution case : This is the case when all given variables are not equal to any constant, for example: there is one row of zeros in matrix e.g 0=3. matrix B don't have any zero row. So, Not True.

One Solution case: This is the case when all variables are independent variables like if they are equal to some constant. e.g x=1,y=2,z=4 , Matrix B have more than one variable in first row due to which it made equation look like x+y=-5. so matrix B can't have only one solution. So, Not True.

Infinitely Many Solutions case: when there is one or more variables which is not equal to any constant and acting as linearly dependent variable, then that matrix have infinite solutions. Matrix B have that variable which is linearly dependent as show in the attachment solution. So, True.  

What is the osmotic pressure of a solution formed by dissolving 44.3 mg of aspirin (C9H8O4) in 0.358 L of water at 25 ∘C?

Answers

Final answer:

The osmotic pressure of a solution formed by dissolving 44.3 mg of aspirin in 0.358 L of water at 25 ∘C is 0.01633 atm. This is calculated using the formula for osmotic pressure 'Pi = n/V RT', inserting the required values including the mole of aspirin, the volume, the gas constant, and temperature.

Explanation:

To calculate the osmotic pressure, we need to use the formula Pi = n/V RT, where 'n' is the number of moles of the solute, 'V' is the volume in liters, 'R' is the gas constant (0.08206 L atm/mol K), and 'T' is the temperature in Kelvin. Firstly, we need to find the molar mass of aspirin (C9H8O4) which is approximately 180.16 g/mol. Consequently, we can determine the mole of aspirin used as 44.3 mg / 180.16 g/mol = 0.000246 moles. Now knowing all values, plug them into the formula: Pi = 0.000246 moles /0.358L * 0.08206 atm mol^-1K^-1 * 298.15K which equals 0.01633 atm, the osmotic pressure of the solution.

Learn more about Osmotic Pressure here:

https://brainly.com/question/37985044

#SPJ3

For the osmotic pressure of an aspirin solution, first convert the mass of aspirin to moles, find the molarity, convert the temperature to Kelvin, and then apply the osmotic pressure formula. The osmotic pressure is found to be approximately 0.0168 atm.

The question asks to determine the osmotic pressure of a solution containing aspirin at a certain temperature. The osmotic pressure can be calculated using the formula:

\(\Pi = MRT\)

Where:

\(\Pi\) is the osmotic pressure,

\(M\) is the molarity of the solution (moles of solute per liter of solution),

\(R\) is the gas constant (0.0821 L atm K^{-1} mol^{-1}), and

\(T\) is the temperature in Kelvin.

First, convert the mass of aspirin to moles using the molecular weight of aspirin (C9H8O4), which is 180.16 g/mol:

\(44.3 mg = 0.0443 g\)

\(0.0443 g \times \dfrac{1 mol}{180.16 g} \approx 2.46 \times 10^{-4} mol\)

Next, find the molarity \(M\) by dividing the number of moles by the volume in liters:

\(M = \dfrac{2.46 \times 10^{-4} mol}{0.358 L} \approx 6.87 \times 10^{-4} M\)

Now convert the temperature to Kelvin:

\(T = 25 \degree C + 273.15 = 298.15 K\)

Finally, calculate the osmotic pressure:

\(\Pi = (6.87 \times 10^{-4} M)(0.0821 L atm K^{-1} mol^{-1})(298.15 K)\)

\(\Pi \approx 0.0168 atm\)

Therefore, the osmotic pressure of the aspirin solution is approximately 0.0168 atm.

You conduct an experiment in which you measure the temperature (T) and volume (V) of a mysterious sphere of gas at several different temperatures. The sphere can expand or shrink to any volume without changing the pressure of the gas inside. As a result of your experiment, you find that the volume (V) of the gas divided by its temperature (T) is always equal to 1.75. What would the volume (V) of the gas be at a temperature of 300K? (assume the unit for volume is liters) Show your work and answer the question with a clear statement. Show each step of your calculations for full points. After showing your calculations, answer the question with a clear statement.

Answers

Volume of the gas at 300K will be 525l itres.

Explanation:

According to Charles' law, the volume of a gas is inversely proportional to its absolute temperature when the pressure of the gas is constant.

Here the V/T is given to be constant and equal to 1.75.

The temperature of the gas = T = 300K.

Let the volume of the gas be V liters.

So according to the question,

V  / T = 1.75.

So,V / 300 = 1.75.

So, V = 300 × 1.75.

Or, V = 525 litres.

So, the volume of the gas at 300K will be 525 litres.

The Volume of the gas at 300K will be 525l liters.

Charles law:

As per Charles' law, the volume of gas should be inversely proportional to the absolute temperature at the time when the pressure of the gas is constant.

Calculation of the volume of the gas:

Here the V/T should be constant and equivalent to 1.75.

The temperature of the gas = T = 300K.

Also, we assume that the volume of the gas is V liters.

So,

V  / T = 1.75.

V / 300 = 1.75.

V = 300 × 1.75.

V = 525 litres.

Find out more information about the  Temperature here:https://brainly.com/question/7510619?referrer=searchResults

A catalyst can increase the rate of a reaction ________. Select one: a. by increasing the overall activation energy (Ea) of the reaction b. by providing an alternative pathway with a lower activation energy c. by lowering the activation energy of the reverse reaction d. by changing the value of the frequency factor (A) e. All of these are ways that a catalyst might act to increase the rate of reaction.

Answers

Final answer:

Catalysts increase the reaction rate by providing an alternative pathway with lower activation energy. They don't alter other energy factors.

Explanation:

In a chemical reaction, a catalyst increases the rate of the reaction by providing an alternative pathway with a lower activation energy. This option 'b' is correct. The activation energy is the minimum amount of energy required for a reaction to occur. By reducing this energy, catalysts speed up the reaction process without being consumed in the reaction itself. They don't alter the overall energy (option 'a'), they don't lower the energy of the reverse reaction (option 'c'), and they do not change the value of the frequency factor ('option 'd'). Hence, answer 'e' is also not correct.

Learn more about Catalysts here:

https://brainly.com/question/35451277

#SPJ6

Other Questions
Which of the following is TRUE about the FAFSA?There is a fee for filing the FAFSA.You want to apply as soon as you can for the FAFSA since financial aid is often awarded on a first come, first served basis.Submitting the FAFSA guarantees you will receive financial aid.You file it just one time - the year before you start your first year in college. In the endocrine system, chemical messengers called _____, which circulate through the _____, communicate information from one part of the body to another. Felicia has a respiratory infection and has been coughing up a lot of mucus. She knows this means that her respiratory system is working to restore balance by getting rid of the invasive materials from her lungs. How does this happen? Identify the word in italics. This is the day I've been waiting for. demonstrative pronoun indefinite pronoun interrogative pronoun relative pronoun not a pronoun what is the main message of stamp money out of politics NEED HELP ASAP PLZZZ Please help ASAPwhat tribe constructed buildings like the ones seen above? A solid conducting sphere with radius 0.75 m carries a net charge of 0.13 nC. What is the magnitude of the electric field at a point located 0.50 from the sphere's center 0.25 beneath the sphere's surface)? In 2014 American Electric Power (AEP), an electric utility with operations from Texas to Michigan, produced 207 million megawatt-hours of electricity (a megawatt-hour measures the output of an electricity-generating plant). The company also had 16,000 U.S. employees.What is average product of the AEP? What is a pseudonoble gas configuration? Give an example of one ion from Group 3A(13) that has it. Chau will run at most 28 miles this week. So far, he has run 18 miles. What are the possible numbers of additional miles he will run? Use t for the number of additional miles he will run. Write your answer as an inequality solved for t. A 3.310-2 mg sample of a protein is dissolved in water to make 0.25 mL of solution. The osmotic pressure of the solution is 0.56 torr at 25C. What is the molar mass of the protein? In the Galapagos Islands, Darwin noted that there were many physical changes that occurred over generations between the organisms in the mainland and those from the Island. How can isolation of a group result in a new species? A 50/50 blend of engine coolant and water (by volume) is usually used in an automobile's engine cooling system. If a car's cooling system holds 5.60 gal, what is the boiling point of the solution? For the calculation, assume that at normal filling conditions, the densities of engine coolant and water are 1.11 g/mL and 0.998 g/mL respectively. Also, assume that the engine coolant is pure ethylene glycol ( HOCH 2 CH 2 OH ) , which is nonionizing and nonvolatile, and that the pressure remains constant at 1.00 atm. The boilingpoint elevation constant for water will also be needed. Energy: a) recycles continuously through an ecosystem b) is used over and over again c) flows in only one direction through an ecosystem d) tends to be concentrated by living organisms Ask Your Teacher It is found experimentally that the electric field in a certain region of Earth's atmosphere is directed vertically down. At an altitude of 340 m the field has magnitude 60.0 N/C. At an altitude of 220 m, the magnitude is 100 N/C. Find the net amount of charge contained in a cube 120 m on edge, with horizontal faces at altitudes of 220 and 340 m. Neglect the curvature of Earth. A woman is riding on a train while watching the display on a GPS unit. She notices that both the "speed" and the "heading" readings are not changing. What can she conclude about the net force acting on the train car? If a family spends its entire budget in a given time frame, the family can afford either 90 cans of soup or 60 frozen dinners. Assuming the family spends its entire budget on just these two goods, what is the opportunity cost of one extra can of soup in the time frame? (Round your answer to two decimal places.) Which of the following is the medical abbreviation for "Every day"? There are many unstated assumptions in the problem given above. Even if the mathematical solution is to make only one or two types of bicycles, there may be demand for the type(s) not being made, which would create problems for the company. Discuss this and other difficulties that would arise in a real situation. Choose the correct answer below. A. The company may acquire more units of aluminum and steel, which would allow for producing more bicycles. A linear programming model cannot account for this. B. Due to higher production of certain types of bicycles, the company may incur higher costs for bicycle repairs. This would reduce the profit generated for certain levels of production. C. Producing more of one type of bicycle requires producing fewer of another type of bicycle. The linear programming model does not account for this. D. The company might need to lower the price of one type of bicycle to sell the predicted number of them. This would reduce the profit generated. Steam Workshop Downloader