Answer: this happens when the atom drops from a higher to a lower energy level
Explanation:
The emission of light from an atom occurs when an electron is from a higher to a lower energy level.
What are electrons?
Electrons are negatively charged particles. Atom is the smallest particle of the molecule. Atoms have positively charged particles called protons. The negatively charged particle is called electrons.
The neutral particle is called the neutron. Electrons rotated in the valence shell. The electrons which are in the last shell are called the valence shell. The electrons in the valence shell move from the last shell to the second shell and then emits energy.
Absorption is the process by which an atom transitions from its ground state to an excited state by absorbing energy from its environment.
After absorbing the energy, the electron advances to a higher energy state. Up the opposite process, called emission, the electron releases the excess energy it had taken in and goes back to its ground state.
Therefore, The emission of light from an atom occurs when an electron is from a higher to a lower energy level.
To learn more about electron, refer to the link:
https://brainly.com/question/1255220
#SPJ6
What two units of air pressure are commonly used in weather reports?
Final answer:
Commonly, air pressure in weather reports is measured in millibars (mb) and inches of mercury (in. Hg), where average sea level pressure is about 1013.2 mb or 29.92 in. Hg.
Explanation:
The two units of air pressure that are commonly used in weather reports are millibars (mb) and inches of mercury (in. Hg). Under average sea level conditions, the atmospheric pressure is approximately 1013.2 millibars or 29.92 inches of mercury. When watching a weather forecast, you might hear meteorologists refer to high and low-pressure systems using these units. High pressure is associated with greater than 1013.2 millibars and is typically indicative of fair weather, while low pressure is lower than this value, often leading to more stormy conditions.
A basketball player can jump 1.6 m off the hardwood floor. With what upward velocity did he leave the floor?
1.4 m/s
2.8 m/s
4.2 m/s
5.6 m/s
Answer:
The upward velocity is 5.6 m/s.
(5) is correct option.
Explanation:
Given that,
Height = 1.6 m
We need to calculate the the upward velocity
Using equation of motion
[tex] v^2=u^2-2gh[/tex]
[tex]u=\sqrt{2gh}[/tex]
Here, g = acceleration due to gravity
v = final velocity
u = initial velocity
h = height
Put the value into the formula
[tex]u=\sqrt{2\times9.8\times1.6}[/tex]
[tex]u=5.6\ m/s[/tex]
Hence, The upward velocity is 5.6 m/s.
The separation of colors by refraction is called:
Neutron stars consist only of neutrons and have unbelievably high densities. a typical mass and radius for a neutron star might be 9.9 x 1028 kg and 1.9 x 103 m. (a) find the density of such a star. (b) if a dime (v = 2.0 x 10-7 m3) were made from this material, how much would it weight (in pounds)?
Which is an example of a positive feedback loop? i. warmer temperatures on earth's surface decrease the evaporation of water. ii. water evaporation creates low-altitude clouds that reflect sunlight back into clouds. iii. water evaporation creates high-altitude clouds which absorb terrestrial energy that would otherwise escape the atmosphere?
The example of positive feedback is, " warmer temperatures on earth's surface decrease the evaporation of water."
What is positive feedback?Positive feedback is a type of feedback that focuses on strengths, contributions, and value.Positive feedback can be as same as the positive reinforcement.Positive feedback is amplifying or magnifying the change or output.The response effect is magnified so that it can occur much faster.In this form of feedback, the output of the system is enhanced.Conversely, in negative feedback, the output is decreased or inhibited.Condition of hysteresis is exhibited by positive feedback.Examples for positive feedback is,Warmer temperature on the earth's surface decreases the evaporation of water.
Because, the temperature of the earth will become hot , cold, warm etc.. this happens due to the evaporation of water.
Hence, Option A is the correct answer.
Learn more about positive feedback,
https://brainly.com/question/26994432
#SPJ2
Which is an example of nuclear energy being converted into heat and light energy?
a.the sun
b.a volcano
c.a rocket engine
d.a coal burning power plant?
Which of the following statements most accurately differentiates potential and kinetic energy?
A. Any object that has motion has kinetic energy, while any object not in motion but with the potential to do work has potential energy.
B. Gravitational potential energy is a form of mechanical energy, while kinetic energy is not.
C. Any object that has motion has potential energy, while any object not in motion but with the potential to do work has kinetic energy.
D. Kinetic energy is a form of mechanical energy, while gravitational potential energy is not.
Answer:
A. Any object that has motion has kinetic energy, while any object not in motion but with the potential to do work has potential energy.
Explanation:
Kinetic energy is associated to the motion energy in which object moves with certain speed.
It is given by the formula
[tex]E_k = \frac{1}{2}mv^2[/tex]
Now similarly we can define potential energy as the energy stored in an object which is due to its position and the object must be at rest.
It may be of gravitational potential energy or spring potential energy or any other type
Gravitational potential energy is given as
[tex]E_p = mgh[/tex]
both kinetic energy and potential energy is part of mechanical energy
so correct answer would be
A. Any object that has motion has kinetic energy, while any object not in motion but with the potential to do work has potential energy.
what is an equilibrant?
an object that has zero net force acting on it
a force that makes the net force on an object zero
two chemical reactions proceeding at the same rate in opposite directions
a force in the same direction as the net force
Which of the following is known as the pulse of a wave?
a non-recurrent wave
the trigger of a wave
the repeat motion of a wave
one cycle of a wave motion
the input of energy to cause a wave motion
There is more than one
Which of the following is known as the pulse of a wave?
A non-recurrent wave and one cycle of a wave motion.
Answer:
A non-recurrent wave and one cycle of a wave motion.
Explanation:
Compared to gamma rays, X-rays have relatively
Answer:
Longer length.Less energy.Less temperature.Less frequency.Explanation:
X-Rays are ''minor'' electromagnetic waves than Gamma Rays.
Gamma rays are the strongest waves in the electromagnetic spectrum with a length order of [tex]10^{-12}[/tex], which indicates a really intensive frequency, those characteristics allow to display a high energy amount.
The second most intense electromagnetic waves are X-Rays, stronger that ultraviolet, visible, infrared, microwaves and radio waves; but weaker than Gamma Rays.
The coefficients in a balanced chemical equation always can express the ratio of
A. Moles of reactants and products
B. Volume of reactants and products
C. Atoms and reactants and products
D. Mass of reactants and products
The coefficient of the balanced chemical equation always express the ratio of moles of reactants and the products as before performing the stoichiometric calculations, the equation should be balanced and the stoichiometric coefficient of the given reactant or product is the number of molecules participating in that equation. The stoichiometric calculations are mostly done in moles rather than in molecules.
All isotopes of hydrogen contain
A.One Neutron
B.Two Electrons
C.One Proton
D.Two Nuclei
A crate pushed along the floor with velocity vâ i slides a distance d after the pushing force is removed. if the mass of the crate is doubled but the initial velocity is not changed, what distance does the crate slide before stopping?
Biomes can be classified geography? true or false
When several radio telescopes are wired together, the resulting network is called a radio
a. Receiver
b. Interferometer
c. Tuner
d. Antenna
Answer:
Interferometer
Explanation:
What would be Kelly's weight be in newtons if her mass is 70 kilograms?
A: 70 x g
B: 70
_ _
g
C: 70
_ _
g^2
D: 70 x g^2
E: 70
Answer:
Choice a
Explanation:
The weight is defined in formulaic terms as the mass *g
You know the mass to be 70 kg so multiply by g which gives choice (A)
A good way to check is that you know weight has the units newtons (N) and you know kg* m/s^2 qill yield newtons therefore choice A is correct
Hope this helps :)
Answer:
See image
Explanation:
Plato
Explain how two rolling bowling balls of different masses can have the same momentum.
According to the principle of conservation of momentum, two bowling balls of different masses can maintain the same momentum as long as the product of their mass and velocity is identical. Essentially, a lighter ball would need to move faster and a heavier ball slower to achieve the same momentum.
Explanation:The subject matter of your question is fundamentally linked to the principle of conservation of momentum which states that the total momentum of a closed system remains constant if no external forces act upon it. Momentum, denoted as 'p', is the product of an object's mass 'm' and its velocity 'v' (p=mv).
Therefore, even if two bowling balls have different masses, they can still have the same momentum if their velocities compensate for the difference in mass. For instance, a lighter ball (smaller m) would need to be moving faster (higher v), while a heavier ball (larger m) would need to be moving slower (smaller v).
Consider this example: a 5 kg bowling ball moving at 2 m/s and a 10 kg bowling ball moving at 1 m/s. Even though the balls have different masses, their momenta are the same (5 kg * 2 m/s = 10 kg * 1 m/s = 10 kg m/s).
Learn more about Conservation of Momentum here:https://brainly.com/question/33316833
#SPJ12
What will be the acceleration of a 40-kilogram object that is pushed with a net force of 80 newtons?
A plane starting at rest at the south end of a runway undergoes a constant acceleration of 1.6 m/s/s for a distance of 1600m before takeoff. What is the time required for takeoff? What is the plane’s velocity at takeoff?
The time the plane requires for takeoff, calculated using the equations of motion, is 50 seconds. The plane's velocity at takeoff is 80 m/s.
Explanation:The subject of your question involves motion in linear dimensions which is a concept in physics. We can solve this using the equations of motion. We can use equation s = ut + 0.5at², where s is the distance, u is the initial velocity, a is the acceleration, and t is the time. Since the plane starts from rest, u = 0. Thus, the equation turns into s = 0.5at².
To find the time required for takeoff, we rearrange the equation to solve for t, giving us t = sqrt(2s/a). Substituting the given values, we find t = sqrt((2 * 1600m)/1.6m/s²) = 50 seconds.
For the plane’s velocity at takeoff, we can use the equation v = u + at where v is the final velocity. Since again the plane starts from rest, u = 0. Substituting the given values, we find the plane's velocity at takeoff to be v = 0 + (1.6m/s² * 50s) = 80 m/s.
Learn more about Physics of Motion here:https://brainly.com/question/13966796
#SPJ3
I am confused on how this table works
What type of weather modification involves the use of large fans to mix surface air with air aloft?
In weather modification, the use of large fans to mix surface air with air aloft is referred to as forced convection. Forced convection, influenced by external forces like fans, allows for a cycling of air by bringing cooler higher altitude air down while propelling warmer surface air up. This is used to improve weather conditions such as reducing smog or fog.
Explanation:The type of weather modification that involves the use of large fans to mix surface air with air aloft is called forced convection. In forced convection, the flow of air (or other matter) is encouraged by external forces like fans. To understand this, you need a certain knowledge of thermodynamics.
For instance, similar to the way a house fan works by moving cooler air in to replace warmer air, large fans in a weather modification context can be used to promote air movement on a larger scale. This is done by drawing cooler, higher altitude air down to the ground, while pushing warmer surface air up, thus creating a cycle of air called convection.
This process is used for various purposes such as reducing ground-level fog or smog. An interesting example of a natural occurrence of forced convection is shown in Figure 3.1, where a weak cold front of air pushes smog over the Yellow Sea, capturing by NASA's Terra satellite in 2012.
Learn more about Forced Convection here:https://brainly.com/question/30763932
#SPJ12
Two identical cars, one on the moon and one on earth, are rounding banked curves at the same speed with the same radius and the same angle. the acceleration due to gravity on the moon is 1/6 that of earth. how do the centripetal accelerations of each car compare?
a.the centripetal acceleration of the car on earth is less than that on the moon.
b.the centripetal acceleration of the car on earth is greater than that on the moon.
c.the centripetal accelerations are the same for both cars.
d.this cannot be determined without knowing the radius and the
Final answer:
The centripetal accelerations of two identical cars rounding banked curves at the same speed, radius, and angle on Earth and the Moon are the same since the formula for centripetal acceleration, which is velocity squared divided by radius, does not depend on the local acceleration due to gravity.
Explanation:
When comparing the centripetal accelerations of two identical cars rounding banked curves with the same speed, radius, and angle, one on Earth and one on the Moon, an important factor to consider is the acceleration due to gravity on each body. The formula for centripetal acceleration (ac) is ac = v²/r, where v is the velocity of the car and r is the radius of the circular path.
Given that both cars have the same speed (v) and radius (r), and that the centripetal acceleration is not directly dependent on gravity, the centripetal accelerations will be the same for both cars. It is essential to note that the gravitational force would affect the normal force and the friction available, but this does not change the centripetal acceleration required to keep the cars on their paths. Therefore, the correct answer is: c. the centripetal accelerations are the same for both cars.
Globalization concerns many workers because ________.
Answer:
Companies will tend to seek lower costs by outsourcing labor
Explanation:
Globalization, in its current form, is led by the large multinationals and neoliberalism. Thus, large corporations settle in many underdeveloped countries in search of abundant raw material and cheap labor. This cheap labor has no alternative but to be subjected to low wages, which, in general terms, ends up shaping the source of misery worldwide. This has been worrying many workers, as the cheapness of mother labor results in lower quality of life for them and their families.
When strong solar winds are displaced poleward by our magnetic fields, we get when strong solar winds are displaced poleward by our magnetic fields, we get sunspots. hurricanes in the tropics. droughts and dust bowls in the american west. intense auroral displays. the van allen radiation belts?
Explain whether an object can have kinetic energy and potential energy at the same time
Yes, an object can have both kinetic energy and potential energy at the same time, such as a ball during its flight. These forms of energy can transform into each other without external work in a closed system.
An object can indeed have both kinetic energy and potential energy at the same time. For instance, a ball thrown in the air has kinetic energy due to its motion and potential energy due to its height above the ground. As it rises, its kinetic energy decreases while its potential energy increases, and vice versa when it falls back down. Energy transformation between kinetic and potential energy occurs without the need for external work if no friction or air resistance is present. In a closed system where no energy is lost to the environment, the sum of potential and kinetic energy remains constant according to the conservation of energy principle.
The distance between two near field communication (nfc) devices is limited to about ________.
Why does it require much less force to accelerate a low mass object than it does to accelerate a high mass object the same amount?
Final answer:
It takes less force to accelerate a low mass object compared to a high mass object by the same amount because acceleration is inversely proportional to mass, as stated in Newton's second law of motion (F = ma).
Explanation:
Understanding Force and Acceleration
The student's question concerns why it takes less force to accelerate a low mass object compared to a high mass object by the same amount. This is explained by Newton's second law of motion, which states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
The law is usually written as F = ma, where F is the force applied, m is the mass of the object, and a is the acceleration. When you apply the same force to two objects of different masses, the object with lower mass will experience a greater acceleration because acceleration is inversely proportional to mass.
For example, applying a force to a basketball will result in a greater acceleration than applying the same force to a car, assuming all other factors such as friction are negligible. This is because the basketball has a smaller mass compared to the car.
Similarly, Newton's second law can be used to calculate how a person's weight, or the force of gravity on the person, changes when on a different planet like the Moon, which has a lower acceleration due to gravity compared to Earth. This principle not only applies to linear motion but also to rotational motion. The angular acceleration of an object is also inversely proportional to its mass, meaning a lighter object will spin faster when the same rotational force is applied to it.
A topic list is a list of important content and material which will be covered on a test. Please select the best answer from the choices provided T or F
The slope of the line on a speed-time graph tells the speed , true or false ?
Can you be fluid overload and dehydrated at the same time
While fluid overload and dehydration are generally opposite conditions, they can coexist if there is a water and electrolyte balance disruption.
Fluid overload and dehydration are typically seen as opposite conditions, but they can coexist under certain circumstances such as when there is a disruption in water and electrolyte balance. Dehydration occurs when the loss of water exceeds the intake, substantially reducing the body's water content. Signs of dehydration include thirst, dizziness, headaches, and in severe cases, loss of consciousness or death.
During fluid overload, the body may hold onto too much water, possibly leading to conditions like hyponatremia, where sodium levels are abnormally low. In contrast, during dehydration, the concentration of electrolytes becomes greater outside of cells, leading to water leaving cells and making them shrink. Both conditions can have severe consequences if not properly managed.
Severe cases of dehydration can lead to electrolyte imbalances and the body's inability to function correctly due to insufficient water. This can happen due to factors such as prolonged physical activity with excessive sweating and insufficient fluid intake, especially in hot weather conditions or during endurance sports. Such imbalances need to be treated promptly to restore the body's fluid and electrolyte balance.