Calculate the pressure of an enclosed fluid on which a force of 150 N is exerted over an area of 10 cm2. give the answer in pascals.

Final answer:

The velocity of the wind against the seagull is found to be 4.0 m/s. When the seagull turns around, it will take approximately 7.7 minutes to return the same distance of 6.00 km with the wind. Wind affects the round-trip time as it reduces and increases ground speed during different legs of the trip.

Explanation:

Calculating Wind Velocity and Round-Trip Time for a Seagull

A seagull flies at a velocity of 9.00 m/s straight into the wind. To find the velocity of the wind, we need to understand that the ground speed of the seagull is the difference between its airspeed and the wind's velocity since it's flying into the wind. Since it traveled 6.00 km in 20.0 min, we convert this to meters per second to get the ground speed, which is 300.0 m/s. Now we can set up the equation:

Ground speed = Air speed - Wind speed

300.0 m/s = 9.00 m/s - Wind speed

After solving, the wind speed is -4.0 m/s, which means the wind is blowing at 4.0 m/s in the opposite direction the seagull is flying.

If the bird turns around and flies with the wind, its ground speed will be the sum of its airspeed and wind speed. To find the time to return 6.00 km, we calculate:

Time = Distance / (Airspeed + Wind speed)

Time = 6000 m / (9.00 m/s + 4.0 m/s) = 461.54 seconds, or approximately 7.7 minutes to fly back with the wind.

Discussing the wind effect on round-trip time, we see that the wind increases the total time taken for a round trip due to the reduced ground speed when the seagull flies into the wind and a slightly less increased ground speed when flying with the wind, compared to no wind where the ground speed would be constant.

Cell size negatively affects the efficiency of waste elimination due to the surface area to volume ratio. Diffusion, which is vital for nutrient intake and waste removal, is less effective in larger cells, leading to potential accumulation of toxic waste and free radicals. Therefore, cell size and shape are crucial for effective waste elimination and overall cell health.

The size of a cell can have a significant impact on its ability to remove wastes and therefore on its survival. Cells require a balance between their surface area and volume to efficiently exchange substances with their environment. The surface area to volume ratio decreases as a cell grows, making it more difficult for substances to diffuse across the cell membrane at a rate necessary to maintain cell function. Diffusion is the primary mechanism through which cells take in nutrients and expel waste products. However, diffusion is only effective over short distances, hence the size of a cell is limited as large cells can potentially accumulate toxins or fail to acquire enough nutrients. Smaller cells, or cells with elongated or flattened shapes, have a higher surface area relative to their volume, allowing for more efficient waste removal and nutrient uptake.

Additionally, the build-up of waste products can be lethal to a cell, as these can interfere with cellular metabolism and lead to the production of harmful substances such as free radicals. These reactive chemicals can damage important molecules like DNA and contribute to diseases. Overall, the efficiency of waste elimination is crucial for the health and viability of a cell, and thus cell size and shape are critical to these processes.

The removal of waste from cells is less efficient in larger cells due to the increased distance substances must travel. This can result in toxic waste accumulation and impact cell survival. Cells adapt by maintaining a small size or a flattened shape to facilitate a more effective exchange of substances.

The process of waste removal in cells is closely related to the size and shape of the cell. Larger cells have a bigger problem with waste accumulation because the distance travelled by waste products to the cell membrane is greater, leading to an inefficient removal process. This inefficiency can cause the accumulation of waste products, including toxic substances like free radicals, which can interfere with normal cellular metabolism and even lead to cell death. These toxic substances may contribute to diseases such as cancer and cardiovascular disease if not efficiently removed from the cell.

In contrast, smaller cells or those with a flattened shape have a larger surface area relative to their volume, which allows for easier and quicker exchange of nutrients and waste with their environment. This is because substances have a shorter distance to travel to reach or leave any part of the cell. Diffusion is more effective in these cells, facilitating timely nutrient uptake and waste elimination, crucial for the cell's survival.

Ultimately, if a cell grows too large, its ability to intake nutrients and expel waste effectively is compromised. Cells have adapted to this limitation by remaining small, flattening, or developing structures like microvilli that increase surface area. Furthermore, multicellular organisms have evolved complex systems like the circulatory and lymphatic systems to help transport substances to and from individual cells, thereby overcoming the limitations of diffusion over larger distances.

The coefficient of friction between the book and the desk is [tex]\boxed{0.268}[/tex] .

Further Explanation:

When a body starts moving on an inclined plane at the minimum inclination, then the inclination of the plane at that instant is termed as the angle of repose. At the angle of repose, the sliding of the body kept on the inclined plane starts.

At this instant, the expression of force balancing on the book can be written as:

[tex]\boxed{{F_f}=mg\sin \theta }[/tex]

Here, [tex]{F_f}[/tex]  is the frictional force experienced by the book and [tex]mg\sin \theta[/tex]  is the weight of the book acting in the downward direction.

The friction force acting on the book in the upward direction along the inclined plane is:

[tex]\begin{aligned}{F_f}&=\mu N\\&=\mu mg\cos \theta \\\end{aligned}[/tex]

Substitute the value of the friction force acting on the book.

[tex]\begin{aligned}\mu mg\cos\theta=mg\sin \theta\\\mu=\tan \theta \\\end{aligned}[/tex]

Substitute the value of [tex]\theta[/tex]  in equation (1).

[tex]\begin{aligned}\mu &=\tan \left({15}\right)\\&=0.267\\\end{aligned}[/tex]

Thus, the coefficient of friction between the book and the desk is [tex]\boxed{0.268}[/tex] .

Learn More:

1. a 30.0-kg box is being pulled across a carpeted floor by a horizontal force of 230 N https://brainly.com/question/7031524

2. choose the 200 kg refrigerator. set the applied force to 400 n (to the right) https://brainly.com/question/4033012

3. forces of attraction limit the motion of particles most in https://brainly.com/question/947434

Answer Details:

Grade: Middle School

Subject: Physics

Chapter: Laws of Motion

Keywords:

Smallest angle, inclined desk, angle of repose, friction force, begins to slide, off the desk, inclined plane, relative to horizontal, coefficient of friction.

Stage 1 sleep is characterized by the transition from alpha waves to theta waves, indicating a light sleep state from which individuals can be easily awakened.

The wave characteristic of stage 1 sleep is predominantly marked by the presence of theta waves. Initially, as a person transitions from wakefulness to sleep, alpha waves are prevalent, characterized by their lower frequency (8-13 Hz) and higher amplitude. As stage 1 sleep progresses, theta waves, which have an even lower frequency (4-7 Hz) and higher amplitude, become more dominant.

These brain waves indicate that the individual is in a light sleep state, as it is quite easy to wake someone during this stage.

The new energy density of the parallel-plate capacitor remains the same as the original energy density after all geometric parameters are doubled.

The energy density, u, of an ideal air-filled parallel-plate capacitor is given by the formula u =  rac{1}{2}  rac{Q^2}{C  imes volume}. The capacitance C of a parallel-plate capacitor is directly proportional to the area of the plates, A, and inversely proportional to the distance between the plates, d. When the geometric parameters of the capacitor are doubled, the area quadruples (since area is proportional to the square of the diameter), and the separation also doubles. Therefore, the new capacitance is eight times larger. However, since the charge Q remains the same and the volume between the plates has increased by a factor of eight (doubling each linear dimension), the new energy density, u', will be the same as the original energy density, u0.

The original energy density between the plates of an ideal air-filled parallel-plate capacitor can be calculated using the formula U₀ = Q² / (2C). When the geometric parameters are doubled, the new energy density U between the plates can be found by considering the new capacitance, which is inversely proportional to the plate separation.

Answer: Option (B) is the correct answer.

Explanation:

A chemical reaction in which there is release of energy into the atmosphere is known as an exothermic reaction.

Also, energy of products is less than the energy of reactants for an exothermic reaction.

For example, A + B [tex]\rightarrow[/tex] C + D + Heat

Whereas a chemical reaction in which heat is absorbed by the reactant molecules is known as an endothermic reaction.

Also, energy of products is more than the energy of reactants in an endothermic reaction.

For example, A + B + Heat [tex]\rightarrow[/tex] C + D

Hence, we can conclude that the statement, energy is released in the reaction is true for this chemical reaction.

Hello!

A 10-kg cart moving at 5 m/s collides with a 5-kg cart at rest and causes it to move 10 m/s. Which principle explains the result? A) law of differential mass B) law of conservation of momentum C) law of unequal forces D) law of accelerated collision

We have the following data¹:

ΔP (momentum before impact) = ?  

mA (mass) = 10 kg

vA (velocity) = 5 m/s

mB (mass) = 5 kg

vB (velocity) = 0 m/s

Solving:

ΔP = mA*vA + mB*vB

ΔP = 10 kg*5 m/s + 5 kg*0 m/s

ΔP = 50 kg*m/s + 0 kg*m/s

Δp = 50 kg*m/s ← (momentum before impact)

We have the following data²:

ΔP (momentum after impact) = ?  

mA (mass) = 10 kg

vA (velocity) = 0 m/s

mB (mass) = 5 kg

vB (velocity) = 10 m/s

Solving:

Δp = mA*vA + mB*vB

Δp = 10 kg*0 m/s + 5 kg*10 m/s

Δp = 0 kg*m/s + 50 kg*m/s

Δp = 50 kg*m/s ← (momentum after impact)

*** Then, which principle explains the result ?

Law of conservation of momentum, since the total momentum of body A and B before impact is equal to the total momentum of body A and B after impact.

Note:  Bodies of different masses and velocities may have the same kinetic energy, if proportionality between the units is maintained it can occur that they have the same kinetic energy.

Answer:

B) law of conservation of momentum

_______________________

[tex]\bf\red{I\:Hope\:this\:helps,\:greetings ...\:Dexteright02!}\:\:\ddot{\smile}[/tex]

The upward force exerted by the floor exists equivalent to the downward force that the toes apply to the floor.

The overall force acting on an item vertically is measured by an upward force. Usually, this is calculated by deducting the total upward force from the total force caused by gravity.

The upward force applied to an object that is fully or partially submerged in a fluid is known as the buoyant force. A body submerged partially or completely in a fluid appears to shed weight or to be lighter, due to the buoyant force.

Every action contains a corresponding and opposite response, according to Newton's Third Law of Motion. The forces of action and response do not affect the same body. This law can be utilized to define if the floor exerts any force on a person's feet.

To learn more about Upward force, refer to:

https://brainly.com/question/28745186

#SPJ2

Answer:

C

Explanation:

Gotta trust me fam

Answer: v1o/v2o=0.8518777161

Explanation:

using the equation from an answer in part A (https://brainly.com/question/14482074)

cancel out L and g and input the other variables in the ratio

((10kg+0.006kg)/0.006kg)sqrt(2(1-cos(4.3))) = 125.1276088 m/s = v1o

((10kg+0.012kg)/0.012kg)sqrt(2(1-cos(10.1))) = 146.8844723 m/s = v2o

v1o/v2o=0.8518777161

Nucleation mechanisms refer to the process where nuclei of a solid phase form within a liquid. This occurs as atoms cluster together to align in an arrangement found in a solid phase, ultimately giving rise to crystalline solids. However, when a liquid freezes before orderly alignment of molecules, it results in amorphous or noncrystalline solids.

The nucleation mechanisms that you're referring to is typically observed during the solidification of a liquid. Here, nuclei of the solid phase form in the interior of the liquid as atoms cluster together in a packing arrangement similar to that found in the solid phase. This process is essential in the formation of crystalline solids where the atoms, ions or molecules organize in a repeating pattern.

Certain arrangements of atoms in solids, ranging from simple cubic to body-centered cubic, echo this nucleation mechanism. For example, when a liquid cools down and freezes, it forms crystalline solids. The atoms arrange in a particular fashion, creating a distinct packing structure, whether it's cubic or otherwise. This unique arrangement provides a stable structure for the solid.

However, it's noteworthy that a liquid can freeze before its particles become ordered, resulting in the formation of amorphous solids or noncrystalline solids. Unlike crystalline solids, the particles in amorphous solids lack an ordered internal structure and are randomly arranged.

https://brainly.com/question/33304496

#SPJ12

The force exerted by the tractor can be calculated with the equation F = mg sin(θ), where m is the mass of the trailer, g is the acceleration due to gravity and θ is the incline angle. Substituting given values, we can find the value of force.

The force that the tractor exerts on the trailer can be determined by using the principle of the forces in equilibrium. We can consider the component of the weight of the trailer acting down the slope (i.e. 3300 kg * 9.8 m/s² * sin(14°)) equal to the force exerted by the tractor.

So, the force exerted by the tractor F = mass * g * sin(θ)

Applying values into the equation: F = 3300 kg * 9.8 m/s² * sin(14°), we get the value of the force.

https://brainly.com/question/26066229

#SPJ12

To move the 3300-kg trailer up a 14° incline with a steady speed, the tractor must exert a force of about 12784.76 Newtons.

In this physics problem, the tractor is doing work on the 3300-kg trailer by moving it up along an incline. The force the tractor must exert can be calculated using the formula F = mg sin(θ), where m is the mass of the trailer, g is the acceleration due to gravity (approximately 9.8 m/s^2 on Earth), and θ is the angle of the incline. Using the given mass of 3300 kg and an angle of 14 degrees (which should be converted to radians for the formula: 14°=0.24 radians), we find that the force required to move the load with a constant speed on the incline (no acceleration) is about 12784.76 Newtons.

https://brainly.com/question/13191643

#SPJ2

Answer:

it will move and won't stop until acted upon by an equal or opposite force

Explanation:

The majority of people should roll a 1 approximately 30 times when rolling a die 180 times, given the law of large numbers. The likelihood that individuals will roll a 1 between 15 to 45 times is high, but a precise percentage would require a binomial distribution calculation.

This problem is an example of a binomial experiment where each roll of the die is an independent trial with two possible outcomes: getting a 1, or not getting a 1. The theoretical probability (p) of rolling a 1 on a fair six-sided die is 1/6=0.1667. So on average, if a die is rolled 180 times, you'd expect to get a 1 about (180)*(1/6)=30 times.

However, the actual results will vary due to chance. This is where the law of large numbers comes in: the more times you roll the die, the closer you'll get to the expected results. Variations due to chance will tend to cancel out, so you would expect the majority of people to roll a 1 somewhere in the range of 15 to 45 times.

To get a specific percentage, you'd need to use a binomial distribution, which is beyond the scope of High School-level math. But, given a large enough group of people rolling the dice 180 times each, you'd expect the majority to fall within this range, because it's close to the expected value of 30.

https://brainly.com/question/32117953

#SPJ3

According to the question,

The initial velocity will be:

→ [tex]v^2 = u^2 +2 ah[/tex]

or,

→ [tex]u = \sqrt{v^2 - 2gh}[/tex]

By substituting the values, we get

      [tex]= \sqrt{(0)^2-2(-9.8)(2.8)}[/tex]

      [tex]= 7.41 \ m/s[/tex]

Now,

The time of ascent will be:

→ [tex]v = u+at[/tex]

or,

→ [tex]t = \frac{v-u}{-g}[/tex]

     [tex]= \frac{0-7.41}{-9.8}[/tex]

     [tex]= 0.756 \ s[/tex]

hence,

The total time will be:

→ [tex]t_{tot} = 0.756+0.756[/tex]

         [tex]= 1.51 \ s[/tex]

Thus the above response is right.

Learn more about vertical height here:

https://brainly.com/question/5763014

The kangaroo is in the air for approximately 1.2 seconds.

The time it takes for the kangaroo to jump to a vertical height of 2.8 m and return to the ground can be calculated using the equations of motion. Since there is no horizontal motion, we can focus on the vertical motion. To find the time the kangaroo is in the air, we need to find the time taken for the kangaroo to reach its maximum height and then double that time to account for the descent.

To find the time taken to reach the maximum height, we can use the equation:

t = \sqrt{\frac{2h}{g}}

where t is the time taken, h is the vertical height, and g is the acceleration due to gravity.

Substituting the given values into the equation:

t = \sqrt{\frac{2\times2.8}{9.8}}

t \approx 0.60 \, \text{s}

Since the kangaroo takes the same amount of time to descend to the ground, the total time in air will be approximately 1.2 seconds.

Answer:true

Explanation:

As shocking as it might be your nose and tongue some what function the same but for a question like this the answer would be true.

Refraction is when the light is changes speed and bends as it travels from medium to another. The water slows down the light, and the image appears to bend.

The term that describes this property of light is Refraction. The correct option is D.

When a light ray falls on the interface of two medium like air and water, then the portion of light is reflected and another portion of the light is refracted into the water medium. The angle of incidence is equal to the angle of reflection but the angle of incidence is larger then the angle of refraction.

So, If you put a straw into a glass of water, the straw looks to be bent because of refraction of light into the water medium.

Refraction is when the light is changes speed and bends as it travels from medium to another. The water slows down the light, and the image appears to bend.

Thus, the correct option is D.

Learn more about refraction.

https://brainly.com/question/14760207

#SPJ2

To find the initial speed of a ball thrown in the air at an angle, that reaches a certain height, one needs to use the formula for the maximum height of a projectile.Hence, solving the equation, the initial speed of the ball should be about 14.14 m/s.

The question given is a typical problem in physics, specifically projectile motion. The maximum height that a projectile reaches in its trajectory is fully determined by the vertical component of its initial velocity. The equation that connects these two values is H = (Vo²sin²θ)/2g, where H is the maximum height reached, Vo is the initial speed, θ is the angle of launch, and g is the acceleration due to gravity, which is approximately 9.81 m/s² downwards. We know from the question that our ball reaches a maximum height of 10m when launched at an angle of 40 degrees, so we must solve the equation for Vo to find our answer.

Substituting the known values, 10 = (Vo²sin²40)/2*9.81. Solving for Vo gives VO ≈ 14.14 m/s. So, the initial speed of the ball should be about 14.14 m/s.

https://brainly.com/question/29545516

#SPJ12

it is known that a shark can travel at a speed of 15 meters/second then the shark can go 150 meters in 10 seconds.

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second.

average speed = total distance /Total time

As given in the problem it is known that a shark can travel at a speed of 15 meters/second,

speed of the shark = 15 meters/second

time taken by the shark = 10 seconds

The total distance covered by the shark in 10 seconds = speed ×time

The total distance covered by the shark in 10 seconds  = 15×10

                                                                                            = 150 metes

Thus, the shark can go 150 meters in 10 seconds.

To learn more about speed from here, refer to the link;

brainly.com/question/7359669

#SPJ2

This would be False!!!

In this case we are given a force of 29,000 N. We know that the equation we  can use is:

Force = mass * acceleration

However this is not just any type of force, because this is the weight of the elevator. So when the force is equal to weight, the acceleration acting is simply gravity. Therefore:

weight = mass * gravity

Calculating for mass:

mass = 29,000 N / (9.8 m/s^2)

mass = 2,959.18 kg